by GeorgeWebManHopperE | Mar 26, 2021 | Productions, Venues, and Events
Challenge: Hopper Engineering was requested to perform a roof analysis of the South Hall of the LA Convention Center covering approximately 350,000 sq. ft. The purpose was to determine the additional live load capacity of the roof structure for rigging loads during...
by GeorgeWebManHopperE | Mar 26, 2021 | Productions, Venues, and Events
Challenge: A 15 ft 6 inch circular rotating “whirlygig” mechanism will be used for a production in California and New York. The mechanism suspends the performer over the stage via eight (8) winches which move the performer up and down. The performer stands...
by GeorgeWebManHopperE | Mar 26, 2021 | Productions, Venues, and Events
Challenge: Our client requested a generic calculation package to analyze an aerial traveling camera system to be used in various indoor and outdoor venues. The purpose of the calculation is to analyze the system components for the expected static and dynamic loads....
by GeorgeWebManHopperE | Mar 26, 2021 | Productions, Venues, and Events
hallenge: Our client requested we analyze and design an elevated platform capable of supporting a train engine weighing 75,000 lbs. The main structural system of the platform was made out of shipping containers, stacked two high, spanning 220 feet. Steel beams spanned...
by GeorgeWebManHopperE | Mar 26, 2021 | Productions, Venues, and Events
Challenge: Hopper Engineering Associates was requested by the Client to evaluate an 18 ft. tall robotic figure made out of steel plating. The statue is displayed outdoors and is subjected to environmental loads. The statue is supported from the back with a frame...
by GeorgeWebManHopperE | Mar 26, 2021 | Productions, Venues, and Events
Challenge: Our client built a 127 foot long dual curved truss “roller coaster” which supports a tracking and rotating drum platform for a touring band to use during the drum solo portion of their live performances. We were requested to perform a structural...
